Spartan Marvel 66 Ton Hyd Ironworker
This Machine comes with Alot of tooling,
10 Brake, Multiple Punches and Dies Etc.
Model: IW66D
General Specifications: (All specifications must be verified
by buyer)
Make: Marvel Spartan
Model: IW66D
Serial # IW66D-152
PUNCHING
Punch Pressure: 66
tons.
Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper: For fast and
easy setup.
Die Holder:
Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling:
1-1/2 in 3/8 material.
Large Tooling: 2 in
5/16 material.
CPD Series: SP51P punch, SP80D die.
Optional Oversize Tooling:
6 in 3/32 material.
Maximum Channel Flange:
7.
Throat Depth: 12
(D); 20 (DX).
Stroke Length:
3-15/16.
Cycles per Minute in 3/4:
30.
Punching Station Work Height: 39-3/4.
FLAT BAR SHEARING
Flat Bar Shear Capacity:
14 in 9/16.
Maximum Width x Thickness:
10 in 3/4.
Lower Blade: Four (4)
usable edges.
Support Table:
Includes guides for accurate positioning and
indicator lines at 30 and 45 degrees left and right.
Adjustable Hold-Down:
Holds work piece securely in position
when shearing.
Upper Shear Blade:
Provides for minimum distortion.
Two (2)
usable edges.
Blade Length:
14-1/4.
Angle Flange Trim:
4.
Flat Bar Shear Work Height:
36.
ANGLE SHEARING
Maximum Capacity 90 degrees: 5 x 5 x 1/2.
Maximum Capacity 45 degrees: 2-1/2 x 2-1/2 x 5/16.
Shearing with no material loss and minimum deformity.
Shear Blades: Four
(4) usable edges.
Angle Shear Work Height:
43-3/4.
BAR SHEARING
Round Bar Max. Capacity:
1-1/2.
Square Bar Max. Capacity:
1-1/2 x 1-1/2.
Five Cavity Round and Square Bar Shear Sizes:
Round 1/2, 1,
1-1/2
Square 3/4, 1-1/2.
Channel Shear Max. (optional): 5.
I-Beam Shear Max. (optional): 5.
Bar Shear Work Height:
48.
NOTCHING
Rectangular Notcher:
2 x 3-1/2 in 5/16 material.
Electrical Interlock Safety Guard
Gauge Table with Stops:
For precise positioning.
Notcher Work Height:
36-1/4.
OTHER STANDARD EQUIPMENT
Magnetic Base Work Light
Adjustable Electric Back Gauge (36)
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Full-Control Foot Pedals (2)
Two (2) Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz
Machine Currently Wired 230 Volt 3 Phase 20.5 Full Load Amp
Machine Net Weight:
3,969 lbs.
Machine Dimensions: (D) 68 L X31 W X67