Naab Machinery Sales
9151 International Pkwy. Ste 1
New Hope, MN 55428
(952) 933-6755
Toll Free 1-800-229-6222
john@naabsales.com


Click the image(s) below to enlarge:




Spartan Marvel 66 Ton Hyd Ironworker

$12,500.00

Spartan Marvel 66 Ton Hyd Ironworker

With: Simultaneous Dual Station Operation

Model: IW66D

General Specifications: (All specifications must be verified by buyer)

Make: Marvel Spartan

Model: IW66D

Serial #  IW66D-162

PUNCHING

Punch Pressure:  66 tons.

Punch Holder and Jog Mode

Punch Work Table: Includes back gauge and adjustable stops.

Adjustable See-Through Punch Stripper:  For fast and

easy setup.

Die Holder:  Adjustable in machined T-slots for quick punch and die alignment.

Standard Tooling:  1-1/2” in 3/8” material.

Large Tooling:  2” in 5/16” material.

CPD Series: SP51P punch, SP80D die.

Optional Oversize Tooling:  6” in 3/32” material.

Maximum Channel Flange:  7”.

Throat Depth:  12” (D); 20” (DX).

Stroke Length:  3-15/16”.

Cycles per Minute in 3/4”:  30.

Punching Station Work Height:  39-3/4”.

FLAT BAR SHEARING

Flat Bar Shear Capacity:  14” in 9/16”.

Maximum Width x Thickness:  10” in 3/4”.

Lower Blade:  Four (4) usable edges.

Support Table:  Includes guides for accurate positioning and

     indicator lines at 30 and 45 degrees left and right.

Adjustable Hold-Down:  Holds work piece securely in position

             when shearing.

Upper Shear Blade:  Provides for minimum distortion.  Two (2)

                                    usable edges.

Blade Length:  14-1/4”.

Angle Flange Trim:  4”.

Flat Bar Shear Work Height:  36”.

ANGLE SHEARING

Maximum Capacity – 90 degrees:  5” x 5” x 1/2”.

Maximum Capacity – 45 degrees:  2-1/2” x 2-1/2” x 5/16”.

Shearing with no material loss and minimum deformity.

Shear Blades:  Four (4) usable edges.

Angle Shear Work Height:  43-3/4”.

BAR SHEARING

Round Bar Max. Capacity:  1-1/2”.

Square Bar Max. Capacity:  1-1/2” x 1-1/2”.

Five Cavity Round and Square Bar Shear Sizes: 

             Round    1/2”, 1”, 1-1/2”

             Square   3/4”, 1-1/2”.

Channel Shear Max. (optional):  5”.

I-Beam Shear Max. (optional):   5”.

Bar Shear Work Height:  48”.

NOTCHING

Rectangular Notcher:  2” x 3-1/2” in 5/16” material.

Electrical Interlock Safety Guard

Gauge Table with Stops:  For precise positioning.

Notcher Work Height:  36-1/4”.

OTHER STANDARD EQUIPMENT

 

Magnetic Base Work Light

Adjustable Electric Back Gauge (36”)

24 Volt DC Control Voltage

Scrap Boxes at Punching and Notching Stations

Adjustable Stroke Depth at Punch

Full-Control Foot Pedals (2)

Two (2) Piece Gauging Table at Punch Station

Keyed Punch Holder for Shaped Tooling

Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz

Machine Net Weight: (D) 3,969 lbs.

Machine Dimensions: (D) 68” L X31” W X67” H;                               

PUNCHING

Punch Pressure:  66 tons.

Punch Holder and Jog Mode

Punch Work Table: Includes back gauge and adjustable stops.

Adjustable See-Through Punch Stripper:  For fast and

easy setup.

Die Holder:  Adjustable in machined T-slots for quick punch and die alignment.

Standard Tooling:  1-1/2” in 3/8” material.

CPD Series:  26 punch, 62 die.

Large Tooling:  2” in 5/16” material.

CPD Series: SP51P punch, SP80D die.

Optional Oversize Tooling:  6” in 3/32” material.

Maximum Channel Flange:  7”.

Throat Depth:  12” (D); 20” (DX).

Stroke Length:  3-15/16”.

Cycles per Minute in 3/4”:  30.

Punching Station Work Height:  39-3/4”.

FLAT BAR SHEARING

Flat Bar Shear Capacity:  14” in 9/16”.

Maximum Width x Thickness:  10” in 3/4”.

Lower Blade:  Four (4) usable edges.

Support Table:  Includes guides for accurate positioning and

     indicator lines at 30 and 45 degrees left and right.

Adjustable Hold-Down:  Holds work piece securely in position

             when shearing.

Upper Shear Blade:  Provides for minimum distortion.  Two (2)

                                    usable edges.

Blade Length:  14-1/4”.

Angle Flange Trim:  4”.

Flat Bar Shear Work Height:  36”.

ANGLE SHEARING

Maximum Capacity – 90 degrees:  5” x 5” x 1/2”.

Maximum Capacity – 45 degrees:  2-1/2” x 2-1/2” x 5/16”.

Shearing with no material loss and minimum deformity.

Shear Blades:  Four (4) usable edges.

Angle Shear Work Height:  43-3/4”.

BAR SHEARING

Round Bar Max. Capacity:  1-1/2”.

Square Bar Max. Capacity:  1-1/2” x 1-1/2”.

Five Cavity Round and Square Bar Shear Sizes: 

             Round    1/2”, 1”, 1-1/2”

             Square   3/4”, 1-1/2”.

Channel Shear Max. (optional):  5”.

I-Beam Shear Max. (optional):   5”.

Bar Shear Work Height:  48”.

NOTCHING

Rectangular Notcher:  2” x 3-1/2” in 5/16” material.

Electrical Interlock Safety Guard

Gauge Table with Stops:  For precise positioning.

Notcher Work Height:  36-1/4”.

OTHER STANDARD EQUIPMENT

Magnetic Base Work Light

Adjustable Electric Back Gauge (36”)

24 Volt DC Control Voltage

Scrap Boxes at Punching and Notching Stations

Adjustable Stroke Depth at Punch

Full-Control Foot Pedals (2)

Two (2) Piece Gauging Table at Punch Station

Keyed Punch Holder for Shaped Tooling

Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz

Machine Net Weight: (D) 3,969 lbs

Machine Dimensions: (D) 68” L X31” W X67” H 

Electrics: 7-1/2 HP 230V/3ph

Equipped with: Many Extra Punches and Dies,

2  Work Stations independently operated.

Misc tooling as pictured.


  • Model: Model: IW66D
  • 1 Units in Stock



If you would like to ask a question or have us get a hold of you, let us know by filling out the form below.


Product Name: Spartan Marvel 66 Ton Hyd Ironworker
  
  
Name:
  
Phone:
  
Email:
  
Question / Comment:
  
  
 
  
Naab Sales Corporation
Copyright © 2019 Professional Web Design by Midwest Web Design