Naab Machinery Sales
9151 International Pkwy. Ste 1
New Hope, MN 55428
(952) 933-6755
Toll Free 1-800-229-6222
john@naabsales.com


Click the image(s) below to enlarge:





Sharp 1118H-CNC 11x18 CNC Toolroom Lathe W/ Anilam 4200T

$24,500.00

Here We Have:

Sharp 1118-CNC 11x18  CNC Toolroom Lathe W/ Anilam 4200T Control


Serial# 901003 New in 2001


Model 1118CNC  

New Factory Specifications:

14-1/2 “ swing over bed ways, 12-3/8” swing over carriage, 6” swing over cross slide.

Machine can use Gang type tooling or quick change tooling with tailstock.

Positioning: +/- 0.000080”, repeatability: +/- 0.000040”, spindle run out 0.000050” TIR.

Programmable spindle speeds up to 4,000 rpm.

Constant Surface Speed.

Alloy steel used on full bed-width bearing surface with dovetail design.

Over size cross slide for extra rigidity.

Oversized preloaded ball screw supported at both ends by angular contact bearings.

AC servo motors for X and Z axis travel.

Anilam Model 4200T 2 axes CNC control.

Full CNC operation and complete manual operation.

Manual operation offers 1 hand wheel 2 axes simultaneous movement for cutting taper.

Make first part manually, subsequent parts automatically (teach-in function).

G-code or conversational programming.

2 front mounted electronic hand wheels (MPG).

Pneumatic power 5C collet closer (standard).

Automatic lube system with low level alarm.

CNC threading with multiple leads capability.

5 HP spindle motor.

"Hardinge-style" lathe

1118H CNC

CAPACITY:

Swing over bed 14.5"

Swing over carriage 12.37”

Swing over cross slide 6”

Tool Height 1/2"

Tooling Plate Size 7.5" x 12" (7.5"x15" opt.)

Maximum X-Axis Travel 9" (12" opt.)

Maximum Z-Axis Travel 5" (8" opt.)

Feed Rate 200 ipm

Rapid Traverse 500 ipm

Carriage Base Movement (Manual) 13.4"

Drive System (X & Z Axis) AC Servo Drive

Linear Guideway System 25mm by NSK

Ballscrews 20 mm (3/4"), C3 Precision Ground

SPINDLE 

Spindle Speed Range (Programmable) 100-4,000 rpm

Spindle Through Hole 1-1/16"

Spindle Collet, Chuck 5C

Spindle Motor 5HP

Accuracy 

Positioning +/- 0.00008"

Repeatability +/- 0.00004"

Spindle TIR 0.00005"

CNC CONTROL 

Anilam Model 4200T PC based,

3.5" floppy drive, Conversational or G-code programming.

GENERAL 

Electricity 220v, 60hz, 3 phase

Coolant Pump Motor 0.25 HP

Net Weight (approx) 2,700 lbs

Complete With:

All Available Manuals

Various Tooling

Buyers Responsibility to confirm accuracy of Machine


  • Model: Model 1118CNC
  • 1 Units in Stock



If you would like to ask a question or have us get a hold of you, let us know by filling out the form below.


Product Name: Sharp 1118H-CNC 11x18 CNC Toolroom Lathe W/ Anilam 4200T
  
  
Name:
  
Phone:
  
Email:
  
Question / Comment:
  
  
 
  
Naab Sales Corporation
Copyright © 2018 Professional Web Design by Midwest Web Design